|
SERVICES AND ALIGNMENTS
ALTURAIR is equipped with a factory set of fixtures and tooling designed specifically for the BD-5 that will match drill your fuselage, wings, vertical stab, horizontal stab, flops, ailerons, rudder, landing gear, and nose gear box. This process will save you countless hours and get you and your BD-5 flying sooner!
FUSELAGE SERVICES
Fuselage nose gear box alignment: FU nose gear box components and alignment kit must be purchased or provided for this service .............................................................................................>>.Price $ 250.00
Stage I: all external skins match drilled, install nose doubler (FU-72), longerons (FU-69, 70). We supply FU-10 11, 13, 27, 28, 37, 43, 44, 48, 57, 58, and 59
......................
.>>Total Price $ 600.00
Stage II: to the above services, we cut out engine compartment doors, drill in FU-14, 17, 18, 23, 24, 60, 62, 63, 65, and 67. You must supply FU-17, 18, 23, and 24
.......
>>Total Price $ 325.00
Special Discount: Stage I & II combines
..
...
..>> Total Price $ 900.00
Stage III: this service is to be done only after fuselage has been riveted together. It will level out the fuselage to install the vertical and horizontal stabilizer and will drill in the wing carry through spar..>>Total Price $ 540.00
WING SERVICES
Basic: for this service, we need main and rear spar and all wing ribs. This service attaches tabs and aligns all ribs to spar ............................................................................................................>>Total Price $ 540.00
Advanced: This includes the above in addition to rivets and proseals ribs in place and match drills #40 holes in wing skins. Send skins and 200 dome rivets
.......................................
>>Total Price $ 775.00
Flap & Aileron Service: for this send flaps, aileron torque tubes, and 1/16 piano wire. We supply our nose and sheet rib series. The service match drills skins and ribs in both flaps and ailerons..>>.Total Price $ 400.00
Jet Length Wing Conversion: This service will take a set of B wings and cut them to 17 feet and does advance service. We also cut flaps and ailerons to length required for this wing. For use in the jet aircraft, the skin thickness is increased to 0.025
........................................................
>>Total Price $ 1,025.00
|
